Skip to content Skip to footer

Instructions LNG DRIVE Heverlee

LNG DRIVE HEVERLEE
E40 -> Brussels
3001 Heverlee
+32 (0)800 99 903
24/7

STEP 1

Park

Park vehicle in the correct position.

Filling point should be aligned with white line.

Shut off the engine

Close vehicle doors and windows

STEP 2

Precautions

No smoking or open fire allowed.

Please don’t use your cell phone.

Wear long pants, long sleeves and closed shoes.

Wear thermo gloves.

Wear safety glasses (or a face shield).

STEP 3

Preparation

Remove dust cap from filling connection (and gas return connection if needed)

Filling connection

Gas return connection

STEP 4

Check and adjust pressure if needed

If pressure of tank is below 10 bars, proceed to step 8

If pressure is more that 10 bars, connect vent hose to the vehicle tank by turning the bayonet connection until it locks. Open the gas venting valve until the pressure is below 10 bars

For Volvo trucks, no need to connect vent hose. Just turn vent lever counter clockwise to open position, until the pressure is below 10 bars. After venting, turn lever to closed position.

STEP 5

Clean the filling nozzle

Remove any moisture from the filling nozzle with compressed air.

STEP 6

Connect the filling nozzle

Carefully connect the filling nozzle with the vehicle tank. Push the 2 levers forward to lock the nozzle onto the tank.

STEP 7

Payment

Insert the fuel card in the payment terminal.

Choose dispenser n°3 / LNG.

Enter the correct PIN and mileage.

STEP 8

Refueling

The cooldown starts automatically. The blue light will be on.
Only for Volvo trucks: de-select the saturated LNG option on the display.

The cooldown is finished when the white light is switched on. The system is ready to refuel.

Push the ‘refueling’ button at least once every 60 seconds. If not pushed within 60 seconds, refueling will be interrupted. Follow the instructions and counter on the display. (the white light will start blinking faster to warn you).

During refueling the green light will be on.

The system will switch off automatically if the tank is full. A message will appear on the display.

STEP 9

Remove the filling nozzle

Pull the levers until they come to a stop (vent position). WATCH OUT: some gas will escape from the nozzle due to residual pressure.

Press the red button and pull the levers further back. WATCH OUT: If the nozzle sticks to the tank, wait for a few minutes, and use compressed air to defreeze the nozzle. WARNING: Never use tools or violence to remove the nozzle.

Don’t forget to put back the dust caps.

If connected, disconnect gas return hose. If needed, defreeze with compressed air.

STEP 10

In case of problems

Ccall +32 (0)78 050 168

IN CASE OF EMERGENCY: Push the EMERGENCY STOP and call 112.

LNG DRIVE Fuel Card

One monthly invoice overviewing all your refuels. Extensive network at home and abroad. Competitive prices.

Apply for your free Fuel Card for fueling LNG & CNG in our network!